|
IMPORTANT NOTES |
| Timber or Metal
Studs must be installed at centres of not more than
300mm |
For partition
that will be subjected to slight
vibration use BELLE High- |
| apart
to provide a firm/sound
background that is free of undulations or |
Flexibility system ie. Belcem Flexi adhesive. |
|
distortion during
&
after tiling. |
Ensure minimum tile
joints of 2-3mm wide. |
| Building Board
surface must be dry, free of
contamination &
treated with |
Avoid tiling over
joints between
boards, if this unavoidable the |
|
BelBond SBR primer prior to tiling. |
. joints between boards must be
strengthened with a suitable dry-wall jointing |
| Spread adhesive
to small areas of approx. 1mē at a time, to prevent surface |
tape. |
| drying
or Skin-Over of adhesive bed. Ensure Solid-Bed-Fixing. |
|
| |
|
