|
IMPORTANT NOTES |
| Bonding Agent
must be tacky or wet when Rendering or Screeding mortar |
Always test compatibility
of Belle Hydro-Seal & Belle Pro Seal I with |
| is
applied. |
type of Natural Stone used &
also the number of treatment coat required |
| Spread adhesive
to small areas of approx. 1mē at a time, to prevent surface |
prior to application. |
| drying
or Skin-Over of adhesive bed. Ensure Solid-Bed-Fixing. |
Ensure minimum
joints of 2mm wide between natural stones. |
| When fixing
light coloured translucent Natural Stone, use
white coloured |
Movement joints
must be incorporated according to the requirements of |
|
Adhesive. |
British Standard
BS 5385 or Malaysian standard MS 1294. |
| When fixing
Natural Stones treated with a water repellant
impregnating |
|
| sealer Cement-Based
Adhesive must be incorporated with
Belcem |
|
| Admix I
Latex Admixture to replace gauging water. |
|
| |
|
