|
IMPORTANT NOTES |
| • Bonding Agent
must be tacky or wet when Semi-Dry Mortar Bed is applied. |
• When fixing
Natural Stones treated with a water repellant
impregnating |
| • Ensure that an
even coat of Adhesive (3-4.5mm thick) is thoroughly applied |
sealer Cement-Based Adhesive must be incorporated with
Belcem Admix I |
| to the
underside of Natural Stones, prior to installation
onto semi-dry mortar |
Latex Admixture, to replace gauging water. |
| bed. |
•
Always test compatibility
of Belle Hydro-Seal & Belle Pro Seal I
with |
| • When fixing
light coloured translucent Natural Stone, use
white coloured |
type of Natural Stone
used & also the number of treatment coat
required |
| Adhesive (As Above). |
prior to
application. |
| • When fixing
dark coloured Natural Stone, grey
coloured adhesive eg. |
• Ensure minimum
joints of 2mm wide between natural stones. |
| Belcem
Superstar can be used. |
• Movement joints
must be incorporated according to the requirements of |
| |
British Standard
BS 5385 or Malaysian Standard MS 1294. |
| |
|
