|
IMPORTANT NOTES |
| Ensure
sufficient adhesive bedding to provide solid-bed fixing of ALC
Blocks. |
Ensure minimum
tile joints of 2-3mm wide. |
| Prior
to rendering, surface of ALC Block Wall must be sound,
dry, free of |
When rendering, ensure that
rendering mortar are firmly pressed onto
ALC |
|
contamination & treated with a surface primer (Belle ALC
Primer). |
Block
to develop a good bond. |
| Spread adhesive
to small areas of approx. 1mē at a time, to prevent surface |
Movement Joints
must be incorporated according to the requirements of |
| drying
or skin-over of adhesive bed. Ensure Solid-Bed Fixing. |
British Standard BS 5385 or Malaysian Standard MS 1294. |
| When fixing
Vitrified Homogeneous Tiles with water absorption <0.5%, |
|
| Cement-Based
Adhesive must be incorporated with Belcem Admix I
Latex |
|
|
Admixture, in replacement of gauging water. |
|
