SPECIFICATION

MANEWTECH - BELLE SDN BHD

BELLE INTERNAL WALL TILING SYSTEM # 3

SUBSTRATE	:	CEMENT-SAND RENDERED PRE-FAB CONCRETE WALL.
AREAS	:	INTERNAL DRY & INTERMITTENT WET AREAS.
		Domestic Toilets & Kitchens, Dining, Lobbies etc.
TYPE OF TILES	:	CERAMIC WALL OR FLOOR TILES.

IMPORTANT NOTES
• Bonding Agent must be tacky or wet when Rendering mortar is applied.	• When grouting to wet duty areas eg. Communal Showers or toilets,Cement-
• Spread adhesive to small areas of approx. 1m² at a time, to prevent surface	Based Grout must be incorporated with Belcem GT-Mix I Latex Admixture.
drying or Skin-Over of adhesive bed. Ensure Solid-Bed-Fixing.	• Ensure minimum tile joints of 2-3mm wide.
• When fixing Vitrified Homogeneous Tiles with water absorption <0.5%,	• Movement joints must be incorporated according to the requirements of
Cement-Based Adhesive must be incorporated with Belcem Admix I Latex	British Standard BS 5385 or Malaysian Standard MS 1294.
Admixture ,in replacement of gauging water.