|
IMPORTANT NOTES |
| Spread adhesive
to small areas of approx. 1mē at a time, to prevent surface |
When grouting
to wet duty areas eg.Communal Showers orToilets, Cement- |
| drying
or Skin-Over of adhesive bed. Ensure Solid-Bed-Fixing. |
Based Grout
must be incorporated with Belcem
GT-Mix I Latex Admixture. |
| Pre-fab
concrete wall surface must
be thoroughly cleansed of all |
Ensure minimum tile
joints of 2-3mm wide. |
|
contaminants eg. dust, grease,
laitances, mould release oil etc.
before |
Movement joints must be incorporated
according to the requirements of |
| tiling
commences. |
British Standard BS 5385 or Malaysian Standard MS 1294. |
|
Where water
suction of the Pre-Fab Concrete
Wall is
high, |
|
|
dampened Pre-Fab Concrete wall surface with water or an approval primer |
|
| (eg.
Belle ALC
Primer), before tiling commences. |
|
