|
IMPORTANT NOTES |
|
Bonding Agent must be
tacky or wet when Rendering
& Screeding |
Ensure minimum tile
joints of 2-3mm wide. |
| mortar is applied. |
Movement joints must be incorporated
according to the requirements of |
| Spread adhesive
to small areas of approx. 1mē at a time, to prevent surface |
British Standard BS 5385 or Malaysian Standard MS 1294. |
| drying
or Skin-Over of adhesive bed. Ensure Solid-Bed-Fixing. |
Shelter must be
provided when rendering/screeding and
fixing/grouting |
| Use Belcem Fine
Grout if joint width is < 3mm & Belcem F & W Grout
if joint |
external tiles. |
| width
is 3-12mm wide. |
|
